Users Manual Part 2

Full Color Card Printer
50
Set the Orientation of Magnetic Cards/IC Cards to Load
Before loading magnetic card/IC cards, you need to set the Orientation of Magnetic Cards/IC
Cards to Load.
→See "Loading Magnetic/IC Cards" on page 13 for how to set Magnetic Cards/IC Cards.
Note
 You can also change the settings by using the printer driver (→See "Opening the
Printer Driver Settings Screen" on page 89).
 This setting is only available when the optional magnetic encoder unit is attached.
1 Switch from Normal Mode to User
Mode
.
→See "Switching to User Mode" on page 24 for details on
ho
w to switch to User Mode.
2 Press the  Key until [Card Setup] is
dis
played, then press the SET Key.
3 Press the  Key until [Set Face] is
dis
played, then press the SET Key.
4 Change the settings by using the /
Keys, then press the SET Key.
• By combining printing sides of the card (front surface/
rear surface) and magnetic strips/IC cards, settings for
loading can be changed as below.
Ready to Print Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Printer Info.
SET:>>
Printer Info.
SET:>>
Card Setup
SET:>>
Card Setup
SET:>>
Card Type Card Type
SET
Set Face
STANDARD
Card Type
SET
STANDAR
D
Set Face
STANDARD
Set Face
STANDARD
Set Face
STANDARD
Set Face
REVERSE
Set Face
REVERSE
Operating Manual MC660
Matica Technologies