Users Manual Part 2

Full Color Card Printer
54
4 Change the settings by using the /
Keys, then press the SET Key.
• When setting numerical values, change each digit
using the /
 Keys. Fix changes using the SET Ke
y
th
en progresses to the next digit.
Pressing the SET Key after the final digit fixes the
change
s. If the MENU Key is pressed prior this
, then
th
e changes will be canceled.
Note
 The factory default settings are [DHCP], [IPsec] and [Password] set to [OFF].
[Subnet Mask] and [Default Gateway] are set to [0.0.0.0].
[IP Address] is set to [169.254.0.0].
[Printer ID] is set to [8].
[Timeout(s)] is set to [30].
 [Interface Setup] settings can also be set when installing the network driver.
 Turn the power off and on to enable the settings.
SET
Operating Manual MC660
Matica Technologies