MaticBox4 Manual

-9- Stacking MaticBox enclosures
MaticBox enclosures can be stacked vertically to help you host a cluster of
single board computers. Simply remove the cover on one of the boxes and
snap the bottom of the other box in its place. It is that easy!
Note that this still provides a space for 25 mm standard fans or blower
(centrifugal) fans and then will still be effective at cooling the cluster.
-10- Space for cables
In addition to ventilation, the openings on the three sides of the MaticBox are used for routing cables or connecting headers. They have a width of 3 mm
which makes them very suitable for variety of applications.
-11- Attaching the universal mounting base
The universal mounting base allows you to securely attach MaticBox to
walls, poles, support beams, pipes and other objects, as well as to
industrial DIN rails.
To attach MaticBox to the mounting base, align the hooks on the base
with the notches on the bottom of the case, then push down and back
(1). Reverse the motion to detach MaticBox from the base – slide
forward and detach (2).
-12- Attaching the universal mounting base to a wall
Use screws (not provided) to attach the mounting base to flat surfaces, such as walls.