MaticBox4 Manual

-13- Attaching the universal mounting base to a DIN rail
Universal mounting base can be easily attached to a 35mm DIN rail found in equipment racks. Attach the side
away from the pin (1) first and then press the other side to snap it into place. To release the base, pull on the pin
(1) first.
-14- Attaching the universal mounting base using zip ties
Universal mounting base also comes with slots that can be used to attach it to other objects, such as pipes and poles, using
zip ties.
15- Natural ventilation
The design of MaticBox allows for good Natural airflow. The openings on the three sides of the body as
well as the two grille openings - one on the lid and the second on the base contribute to the good air
circulation in the case itself. The feet under the box also play a role in this as they lift the box and air
has the opportunity to pass under it and cool the single-board computer underneath.
-16- Place for a light indicator / LED
The round hole on the low and tall covers can provide access to a LED on your extension board. So you can communicate visual
status to your users.
-17- Place for stickers, labels and other.
For your convenience, we provided special areas where you can put stickers and
project labels. They are indented and there is no danger of your markings falling
off or peeling off. The four places are located on the tall and low cover,
underneath the base as well as on the multifunctional base.