User`s guide

Vector Scope

5-525

Open scope immediately

Opens the scope from the Vector Scope parameters dialog box while the

simulation is running. The check box becomes deselected automatically

after use. Tunable.

Scope position

A four-element vector of the form

[left bottom width height] specifying

the position of the scope window.

(0,0) is the lower-left corner of the

display. Tunable.

Axis properties Dialog Box

Axis properties

Select to expose the

Axis Properties panel. Tunable.

Frequency units

The frequency units for the x-axis,

Hertz or rad/sec. (Visible when the

Input domain parameter is Frequency.) Tunable.

Frequency range

The frequency range over which to plot the data,

[0..Fs/2], [-Fs/2..Fs/2],

[0..Fs], where F

is the sample frequency of the original time-domain

signal, 1/T

. (Visible when the Input domain parameter is Frequency.)

Tunable.

Inherit sample time from input

Computes the time-domain sample period from the frame period and frame

size of the frequency-domain input; use only if the length of the each frame