User manual

28
3.5 Other Simulation Environments
3.5.1 Dymola – Matlab interface
Compatibility
The Dymola – Simulink interface now supports Matlab releases from R2008a (ver. 7.6) up
to R2013a (ver. 8.1). Only Visual Studio C++ compilers are supported to generate the
DymolaBlock S-function. The LCC compiler is not supported.
3.5.2 Real-time simulation
dSPACE SCALEXIO support
In addition to the previously supported hardware platforms DS1005 and DS1006, Dymola
2014 FD01 now also introduces support for the SCALEXIO platform.
Compatibility – dSPACE
Dymola 2014 FD01 generated code has been verified for compatibility with the following
combinations of dSPACE and Matlab releases.
dSPACE DS1005 and DS1006 platforms
• dSPACE Release 6.2 with Matlab R2008a
• dSPACE Release 6.3 with Matlab R2008b
• dSPACE Release 6.4 with Matlab R2009a
• dSPACE Release 6.6 with Matlab R2010a
• dSPACE Release 7.0 with Matlab R2009bSP1 and R2010bSP1
• dSPACE Release 7.1 with Matlab R2011a
• dSPACE Release 7.2 with Matlab R2011b
• dSPACE Release 7.3 with Matlab R2012a
• dSPACE Release 7.4 with Matlab R2012a and R2012b
• dSPACE Release 2013-A with Matlab R2012a, R2012b, and R2013a
SCALEXIO
• dSPACE Release 7.4 with Matlab R2012a and R2012b
• dSPACE Release 2013-A with Matlab R2012a, R2012b, and R2013a
The selection of supported dSPACE releases focuses on releases that introduce support for a
new Matlab release and dSPACE releases that introduce a new version of a cross-compiler
tool. In addition, Dymola always support the three latest dSPACE releases with the three
latest Matlab releases. Although not officially supported, it is likely that other combinations
should work as well.