User`s guide

setxpcenv
14-94
TcpIpGateway
Value is 'xxx.xxx.xxx.xxx'.
In the xPC Target Explorer window
TcpIp
gateway address
box, enter the IP address for
your gateway. This property is set by default to
255.255.255.255, which means that a gateway
is not used to connect to the target PC.
If you communicate with your target PC from
within a LAN that uses gateways, and your host
and target computers are connected through a
gateway, then you need to enter a value for this
property. If your LAN does not use gateways,
you do not need to change this property. Ask
your system administrator.
TcpIpTargetDriver
Values are 'NE2000', 'SMC91C9X', 'I82559',
and
'RTLANCE'.
From the xPC Target Explorer window
TcpIp
target driver
list, select NE2000, SMC91C9X,
I82559, or RTLANCE. The Ethernet card provided
with xPC Target uses the
NE2000 driver.
TcpIpTargetBusType
Values are 'PCI' and 'ISA'.
From the xPC Target Explorer window
TcpIp
target bus type
list, select either PCI or ISA.
This property is set by default to
PCI, and
determines the bus type of your target PC. You
do not need to define a bus type for your host
PC, which can be the same or different from the
bus type in your target PC.
If
TcpIpTargetBusType is set to PCI, then the
properties
TcpIpISAMemPort and TcpIpISAIRQ
have no effect on TCP/IP communication.
If you are using an ISA bus card, set
TcpIpTargetBusType to ISA and enter values
for
TcpIpISAMemPort and TcpIpISAIRQ.
Environment Property Description