User`s guide

setxpcenv
14-96
TargetScope
Values are 'Disabled' and 'Enabled'.
From the xPC Target Explorer window
Enable
target scope
list, select either Enabled or
Disabled.
The property
TargetScope is set by default to
Enabled. If you set TargetScope to Disabled,
the target PC displays information as text.
To use all the features of the target scope, you
also need to install a keyboard and mouse on the
target PC.
TargetMouse
Values are 'None', 'PS2', 'RS232 COM1', and
'RS232 COM2'.
From the xPC Target Explorer window
Target
mouse
list, select None, PS2, RS232 COM1, or
RS232 COM2.
Before you can select a target mouse, you need
to set the
Target Scope property to Enabled.
Target mouse allows you to disable or enable
mouse support on the target PC:
• If you do not connect a mouse to the target
PC, you need to set this property to
None;
otherwise, the target application might not
behave properly.
• If the target PC supports PS/2 devices
(keyboard and mouse) and you connect a PS/2
mouse, set this property to
PS2.
• If you connect a serial RS-232 mouse to the
target PC, select either
RS232 COM1 or RS232
COM2
depending on which serial port you
attached the mouse to.
Environment Property Description