User`s guide

Signal Tracing
3-21
If you have scopes of type file, you can copy the file that contains the signal
data from the target PC to the host PC. See “Copying Files to the Host PC” on
page 3-24.
Software Triggering Scopes
You can set up a scope such that only a user can trigger the scope. This section
assumes that you have added a scope to your target application (see “Creating
Scopes” on page 3-12) and that you have added signals to that scope (“Adding
Signals to Scopes” on page 3-16).
1 In the xPC Target Explorer window, select the scope that you want to trigger
by software. For example, select
Scope 1.
The properties pane for that scope is displayed.
2 From the Trigger mode list, select Software.