User Manual

Page 4
The following procedure will select the appropriate TriggerPad channel
for use with any applicable Matric receiver.
1. Disconnect the associated receiver from power and field wiring.
Also, disable any other devices that could be inadvertently activated
by the TriggerPad during this process.
2. Remove the four corner screws and open the back of the Trigger-
Pad.
3. Remove batteries.
4. Install 22 gauge link wire into the LINK HEADER between position 7
and 8 as shown below.
+
-
+-
+
-
BATTERIES
TP 100
Link
Header
+
-
+-
+
-
BATTERIES
TP 105
Link
Header
TP 105
LINK HEADER
10
1
246810
3579
TP 100
LINK HEADER
12
4
6
8
3
5
7
9