BIN mine ey Packing list. . LL 0 Parts and names .. LL Front, L002 Rear . 03 Appendix 06 Technical specifications |, C08 Power specifications . L086 OF Other specifications. .
Parts and noes Ria Seg Front 8 Power on/Standby After connecting to power supply, press this bunion to power on the writ, press it again to let the unit standby. €) LEB indicator The LED indicator will go off when the unit is standby. It flashes when the device is delayed starting, and will keep it up after the device is started.
Parts and noes Ria Seg Rear element: W2 8 Mons mode input nn mane mode, # single amplifier drives 1 speaker. Connect amplifier to 1 channel of the front-end adieu source device through an XLR cable, € stares mods Input n stereo mode, 2 single amplifier drives 2 speakers, Both RCA and XLR cables can be used ta connect fo the left and right channel of the front end audio source device.
Parts and noes BIN mine ey element: W2 £3 Speaker output Please refer to the diagram below for speaker connection in Steve mode.
Parts and noes BIN mine ey element: W2 & uss Type For firmware updates, © Trigger outputting Connect to audio devices with trigger ports through a 83.5 mm omen plug bales, to achieve 2 linkage control between the amplifier and other devices, The trigger output provides 2 12¥ DC signal, & azimuth This unit adapts to ACL0-120V and AC220-240V power voltage range automatically.
Attention Ria Seg « This product is for indoor use only. « For full ventilation, it is recommended to reserve a space of larger than 5 om around the device, + Do not cover the alr vents with stuffs such as papers, tablecloths, and curtains to obstruct ventilation. « Do not place stuff with flame, such as lighted candles, on the device. « If the device is used in tropical areas, please be careful to prevent insects from entering the unit through the air vents.