Packing list. . Parts and names Operations before using Connect to network Mh Rte App... Driver for USB Audio. Appendix Techies! specifications. Power specifications .
Front 3 Power on/Standby After connecting bo power supply, tap on this button to power on the unit, ap on it again to let the unit standby. It takes about 30 seconds for the first start up after connecting to power supply each time. £1 18 remote receiver This product supports RM4 remote control, the input canned selection and playback control can be done through the RII, The Ri is 2n optional accessory, i's not provided with the product. The RM can be purchased separately Needed.
EOE GT Rear raiment B [ sentiment 8 EB 1319S Output. The 115-LIDS port hatpins 3 maximum 32BR/TSEKHZ sampling rate PCM signal, DEDE4/128/256/512 signal on Native DST standard, and DEDE4/128/256 signal on Do standard. Connect tn the deviates with 113-IDS Input port from Mate Audio or ether compatible devices through HDMI cables, The unit is compatibility with 4 kinds of 1IS4¥ES pin definitions, which can be viewed and configured In the MA Remote App.
Operations before using Connect to Network LAN Connect the product to the LAN port of the network router through an Theme cable. it is recommended to set up the router as a CPD server, the unit will be assigned an IP address automatically. Select "LAR" In option Network in Settings menu. After joining the network, there will bea & shown in the status bar.
Operations before using Driver for USB Audio When connecting the device to 3 Windows 7/8/10/11 computer via USB connection 55 an external audio device, please install drivers as following st ructions: 1. Double-click the driver installation package and click “Neg”. se maa Diet Select installation path and click “Install”. Jus 3.
Operations before using dime § IE's no need to install drivers for macs, just select “element Series” 3s the audio output device in Sound Preferences. The element devices can be connected tn an iPhone or iPad via a Lightning ta USE Camoens Pervade. “The element devices can be connected to Android devices via an OTG adapter, but nat every Android devices are compatible with device via OTG connection.
Power specifications Power Voltage © AC 100V-240V 50/60Hz Standby Power Consumption : <5W Maximum Power Consumption © <30W Other specifications Weight! pounds) Size: Width 240 rom (3.43 inches) Depth 245 mm (9.85 inches) Height 58mm {2.28 Inches) 24 mm 245 mm 8 ren Jus raiment B About Ron Ready Being Ron Ready means that Matrix Audi devices transparently discover and connect to Soon without any configuration, and bit perfect audio Is delivered from Soon to your devices.
eT) dean 8 « This product is for indoor use only. * For full ventilation, it is recommended to reserve a space of larger than 5 cm around the device. « Do not cover the air vents with stuffs such as papers, tablecloths, and curtains to obstruct ventilation. * Do not place stuff with flame, such as lighted candles, on the device.
