Installation Instruction
If you enable the Auto Add New Devices check box in the
Server (Admin Module
>
System Configuration
>
Global
Policy > Device) the device will be added automatically. You
can also add the device later manually.The Status will be
online only if the Device is added in the Server.
Make sure the Monitor Service is running.
•
Click
Basic Profile
and select the desired
Server Connection
–
COSEC CENTRA or COSEC VYOM, see Figure 35.
Figure 35
Configuring the Settings from ARGO FACE Web Page
•
Open the Web Browser in your computer.
• Enter the IP Address of the COSEC ARGO,
default: http://192.168.50.1
in the address bar of the browser
and press the Enter key on your computer keyboard.
•
The Login page appears as shown in
Figure 34
. Enter the
default
User Name
as
Admin
. You need to set the password,
hence enter the desired password in
New Password
and re-
enter the same in
Confirm Password
.
•
Click
Login
.
Figure 34
•
Click
Server Settings
.
For COSEC CENTRA
•
Enter the
COSEC Server Address
and
Port
in
URL
, see
Figure
36
.
•
Click the
Submit
button, the
Web Server URL
(Address) will
be fetched automatically. If required change the URL and
Directory Name as per your Server Settings.
29
30