Owner Manual

3. Attach the C-Channel frame
Use the 10 supplied flat brackets to secure the frame to your support structure. Attach the flat
brackets to the C-Channel using screws or rivets (Fig. 8), ensuring that the brackets are offset from
the centre of the C-Channel (Fig. 9) so that they do not interfere with the thermal expansion of the
panel. We recommend using three brackets (evenly spaced) on each long side and two brackets on
each short side (Fig. 1).
Attach the other end of each bracket to the support structure using appropriate screws. Alternatively,
you can drill holes straight through the C-channels and attach directly to the support structure behind
using 2” or longer screws. Ensure that the screws do not go through the panel inside the C-channel
as this will interfere with expansion and contraction, which will void the warranty.
15 Year Manufacturer's Warranty
Design Flow Pty Ltd warrants to the original purchaser that Matrix screening, fencing and flooring products will be free of
structural faults due to defects in manufacturing for a period not exceeding 15 years from the date of purchase.
Whilst the colour formulation of the materials has been designed to withstand many years of exposure to the sun and weather,
the warranty does not cover natural fading or a reduction of material properties over time.
This warranty is only valid where the product has been installed according to the manufacturer's installation instructions.
All warranty matters are to be referred through the original place of purchase. Valid warranty claims will be settled by either full
replacement or satisfactory repair of the faulty product.
Warranties and remedies including compensation for consequential or direct losses, other than those set out above are hereby
excluded, except to the extent where to so exclude would contravene any law (including the Trade Practices Act (Cth. 1974) or
cause any part of this warranty to be void.
OUTDECO USA
2045 Corte Del Nogal
Carlsbad CA 92011
P: 760-444-4193
E: [e-mail]