Instructions / Assembly

F6225
Installation & Operating Instructions for the
Owner’s Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
USING YOUR CEILING FAN WITH REMOTE CONTROL
IMPORTANT POINTS TO REMEMBER:
1. Please read and save these instructions.
2. Please note that all fixed wiring appliances should be installed by a qualified electrician.
3.
The supply to the remote control receiver should be connected through a mains switch, i.e. existing
wall switch.
4. Disconnect from power supply at wall switch before working on remote control receiver or ceiling fan.
5.
Install receiver into the ceiling fan canopy of the fan to ensure
proper protection.
6. This unit is to be used for the control of ceiling fan and in an AC120V 60Hz power supply only, rated
max 1.25A for fan, max 300W for lig
ht.
7.
Do not install in damp locations or immerse in water. (For indoor use only.)
8.
Do not pull on or cut leads shorter.
9. Do not drop or bump the unit.
10. PLEASE NOTE: The battery will weaken with age and should be replaced before leaking takes place
as this will damage the transmitter. Dispose of used battery properly, keep the batte
ry out of reach of
children.
11.
CAUTION: To reduce the risk of fire or injury, do not use this product in conjunction with any variable
(rheost
at) wall contro
l.
INST
ALLATION INSTRUCTIONS
1. Ceiling fan must be set at HIGH speed and light kit (If any) at ON position by pressing the “Light
Switch” after installation.
2. Once the connection has been made, the receiver inserts into the drop rod hanging bracket. The
canopy comes up to cov
er the receiver and bracket.
IMPORTANT
YOU MUST SET CEILING FAN MANUAL SWITCH TO HIGH SPEED AND LIGHT KIT (IF ANY)
TO ON POSITION BEFORE OPERATING REMOTE CONTROL.
CAUTION: INCORRECT WIRE CONNECTION WOULD DAMAGE THIS RECEIVER.