Operator's Manual

14 | P a g e

 The Setup Info Icon- will supply the user with all the preset alarm levels for the installed

sensors

 The ClockIcon- will give the user the status of the onboard Real Time Clock.

 The Battery Info Icon- will supply the battery information, the voltage, current drawn and

capacity left.

 The Test Info Icon – will display the tested values for each gas within the switch on time

selected.

 The Peak Info Icon – will display the peak value for the day after the switch on time has

expired.

 The Cal InfoIcon - will display the calibration information.

 TheDownloadIcon- will display the record count and size of the memory card fitted.

 TheGraph Icon - will be a graphic display of all the sensors fitted.

 The MeasureMeshIcon – will enable radio link for the instrument.

1.4 Graph Screen Operation

Figure 10: Graph screen

The graph will display for 15 minutes then revert back to the main screen. All alarms and indications will

still be active when the graphic display is used.