User Manual

Matrix Design Group, LLC | 3299 Tower Drive Newburgh, IN 47630, USA | 812.490.1525 | www.matrixteam.com

MATRIX

Engineering Safety • Advancing Automation

3299 TOWER DRIVE

NEWBURGH, IN 47630

812 490 1525 WWW.MATRIXTEAM.COM

3 RF ANTENNA

NOTE: The RM-10002705 Module bearing FCC ID: USKRM-10002705 and IC: 11898A-10002705

has been approved by the FCC and ISED to operate with the antenna types listed below with the

maximum permissible gain and required antenna impedance for each antenna type indicated.

Antenna types not included in this list, having a gain greater than the maximum gain indicated for that

type, are strictly prohibited for use with this device.

Le présent émetteur radio RM-10002705, FCC ID: USKRM-10002705, IC: 11898A-10002705 a été

approuvé par FCC y ISED pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant

un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne

non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement

interdits pour l'exploitation de l'émetteur.

Patch Trace (Flex Antenna): 0.7 dBi Gain

Trace: 1.5 dBi

3.1 2.4GHZ ANTENNA

taoglas-2.4G-FXP70.

07.0053A.pdf

3.2 433MHZ ANTENNA

Molex

433M--987650-7461.p

4 POWER SUPPLY

There is an internal Max15027 power regulator, its input voltage 1.425 to 3.6V, and deliver up to 1A

of continuous output current wit typical dropout voltage of only 75mV. The output voltage is

adjustable from 0.5V to Vin and is +/-2% accurate over load and line variations from -40 to + 125 C.

radio-module-SCH.

pdf