CXP
3 ENGLISH 17 繁體中文 31 日本語 45 한국어 59 TIẾNG VIỆT 73 ภาษาไทย العربية 87
ENGLISH IMPORTANT PRECAUTIONS SAVE THESE INSTRUCTIONS When using Matrix exercise equipment, basic precautions should always be followed, including the following: Read all instructions before using this equipment. It is the responsibility of the owner to ensure that all users of this equipment are adequately informed of all warnings and precautions. replacement parts supplied by Customer Technical Support or an authorized dealer.
ENGLISH ASSEMBLY UNPACKING TOOLS REQUIRED: Unpack the equipment where you will be using it. Place the carton on a level flat surface. It is recommended that you place a protective covering on your floor. Never open box when it is on its side. F 3 mm Allen Wrench F 5 mm Allen Wrench F 10 mm Allen Wrench IMPORTANT NOTES F Flat Wrench (15mm/17mm 325L) During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded.
ENGLISH ASSEMBLY TENSION CONTROL & EMERGENCY BRAKE LEVER HANDLEBARS SADDLE CONSOLE HORIZONTAL SADDLE ADJUSTMENT LEVER WATER BOTTLE HOLDER HORIZONTAL HANDLEBAR ADJUSTMENT LEVER SADDLE HEIGHT ADJUSTMENT LEVER HANDLEBAR HEIGHT ADJUSTMENT LEVER MAIN FRAME PEDALS SERVICE PANEL CRANK FLYWHEEL TRANSPORT WHEELS TRANSPORT HANDLE FRONT STABILIZER TUBE REAR STABILIZER TUBE LEVELERS 5
ENGLISH ASSEMBLY 1 Hardware A B Bolt (M12x25L) Flat Washer Qty 3 Pre-installed Hardware G Screw (M6x50L) Qty 1 Torque Value G - 10 Nm / 7.4 ft-lb 4 4 G B A B A Torque Value 78 Nm / 58 ft-lb. 2 Hardware D E F Stopper Screw (M8x20L) Screw (M4x6L) Qty 1 1 2 D F LEFT PEDAL 40 Nm / 29.
ENGLISH ASSEMBLY 4 I Hardware ASSEMBLY COMPLETE Qty Screw (M4x10L) 3 I 1 2 I 3 7
ENGLISH CONSOLE OPERATION HOME SCREEN RUN SCREEN (RPM) B D G C H E I J F A 8
ENGLISH CONSOLE OPERATION SIGN IN The CXP has a fully integrated touch screen display. All information required for workouts is explained on screen. Exploration of the interface is highly encouraged. 1) Enter your XID and touch A) POWER BUTTON: Press to wake display/power on. Press and hold for 3 seconds to put display to sleep. Press and hold for 10 seconds to power off.
ENGLISH CONSOLE OPERATION WIRELESS HEART RATE TARGET TRAINING WORKOUT 1) Start pedaling until the default screen appears. To connect your ANT+ or Bluetooth SMART heart rate device to the console, touch and then touch HEART RATE DEVICE PAIRING. 2) Either swipe right or tap the metric box with an orange triangle to take you directly to the desired screen. The heart rate function on this product is not a medical device.