- Matrix Network Router User Manual

ManualsBrandsMatrix Hairstyles ManualsNetwork RouterLMS4000

lms057_ap_01 1

LMS8000 / LMS4000

Feature Support Matrix

End User Modem Feature Support

Features not listed in the following table are similar in all models of End User Modem.

Feature

EUM

3000

EUM

3003

EUM

3004

EUM

3005

EUM

3006

EUM

8000

Adaptive Modulation

Autoconfiguration via RADIUS

XXX

Automatic Frequency Discovery

XXX

CCU8000 Compatibility

XXX

DHCP Client

XXX

EUM Antenna Alignment Utility

XXXX X X

EUM Configuration Utility

XXX

Executable Image

: “app” series

Executable Filename: “sa1110.exe”

XXX

Executable Image

: “eum v1x.y” series

Executable Filename: “eum.exe”

Executable Image

: “eum v3x.y series

Executable Filename: “eum.exe”

External Antenna Connector

XXXX

Indoor Switched Beam Diversity Antenna

Support

XXXX

Integrated High-gain, Active Polarization

Diversity Antenna

Summary of content (10 pages)

PAGE 1
LMS8000 / LMS4000 Feature Support Matrix End User Modem Feature Support Features not listed in the following table are similar in all models of End User Modem.
PAGE 2
Feature Local Link Address Support12 EUM 3000 EUM 3003 EUM 3004 EUM 3005 EUM 3006 EUM 8000 X X X X X X X X MDB1000 Installation Tool Support13 X OFDM: Multiple Modulation Schemes from 1.5 to 13.
PAGE 3
8. Different models support different software images with different names. For example, to upgrade the EUM3006 to version 11.3, the file eumv113b2.exe from the WaveRider web site is put to the EUM as eum.exe. See “Upgrading the Network” in LMS8000-LMS4000 Managing the Network for details. 9. See “Antenna Connector” in LMS8000-LMS4000 Radio Networking Concepts and the installation manual for the unit for details. 10.
PAGE 4
Base Station Modem Feature Support Features not listed in the following table are similar in all models of Base Station Modem. Table 1 Base Station Modem Feature Support Feature CCU 3000 CCU 3100 CCU 3110 Adaptive Modulation1 Antenna diversity control2 Executable Image3: “app” series Executable Filename: “sa1110.exe” X X X X CCU 8000 CCU 8010 X X X X X X X X X Executable Image3: “ccu v2x.y” series Executable Filename: “ccu.exe” Executable Image3: “ccu v4x.
PAGE 5
1. Adaptive Modulation selects the optimal transmit modulation scheme for each link to an EUM. The CCU selects the optimal scheme for each EUM individually, so that EUMs nearby can use high rates and EUMs far away can use low rates simultaneously. See “Adaptive Modulation” in LMS8000-LMS4000 Radio Networking Concepts for details. 2. The diversity mode used for antenna selection can be set in these models. See “Antenna Diversity Mode” in LMS8000-LMS4000 Managing the Network for details 3.
PAGE 6
The table above applies with version 7.0 software in the CCU3000; version 20.4 software in the CCU3100 and CCU3110; and version 40.1 software in the CCU8000.
PAGE 7
Point to Point Master Station Feature Support Features not listed in the following table are similar in all models of Point to point master. Table 2 Point to Point Master Station Feature Support Feature NCL 1900 SL900 Adaptive Modulation1 NCL 8010 X X X Antenna diversity control2 Executable Image3: “app” series Executable Filename: “sa1110.exe” NCL 8000 X X X Executable Image3: “ccu v2x.y” series Executable Filename: “ccu.exe” Executable Image3: “ccu v4x.y series Executable Filename: “ccu.
PAGE 8
1. Adaptive Modulation selects the optimal transmit modulation scheme for each link to an EUM. The CCU selects the optimal scheme for each EUM individually, so that EUMs nearby can use high rates and EUMs far away can use low rates simultaneously. See “Adaptive Modulation” in LMS8000LMS4000 Radio Networking Concepts for details. 2. The diversity mode used for antenna selection can be set in these models. See “Antenna Diversity Mode” in LMS8000-LMS4000 Managing the Network for details 3.
PAGE 9
18.These models support a serial port for access to the command line interface. See “Access Interface” in LMS8000-LMS4000 Managing the Network for details. 19.Plus solar loading up to 1120 W/m2 20.Industry standard IEEE802.11 TKIP Encryption is used to protect user data privacy and integrity. See “Security” in LMS8000-LMS4000 Data Networking Concepts for details. The table above applies with version 7.0 software in the NCL1900; version 20.4 software in the SL-900; and version 40.
PAGE 10
— This page is intentionally left blank —