User Manual - Ring Light

Matrix Light ML-115R LED Ring Light ••• 16
- Memory indicators LED
Shows current value stored successfully (blink three times when you store
current value) and which memory currently used.
- Battery level warning LED
When the battery level drops below 15%, the battery warning indicators
light up. In this case, recharge the battery as soon as possible. Matrix Light’
s ML-BA12 Li-ion battery does not suffer from a memory effect, so
frequent charging is recommended. Completely discharging the battery
will drastically reduce the capacity of the battery and should be avoided.
- Manual/Auto indicator LED (Camera Cue/Cut synchronization)
When the light is connected to an ENG Camera power source, it’s
operation can be synchronized with the Cue/Cut button operation of the
ENG camera utilizing the ENG camera’s Power Remote function. When the
Auto mode indicator LED is on, the LED light’s power switch function will
be disabled (The LED light always turns on).
To turn on the Auto mode, press and hold the power and brightness switch
for 3 or more seconds. Repeat the procedure to turn off Auto mode.
- Power indicator LED
Shows whether the ML-115R LED Ring Light is on or off.
- Turbo mode indicator LED
Indicates that Turbo mode is functioning.
In Turbo mode, the color temperature controls are disabled. (Always set on
4,500K color temperature)
⚠ Caution: Using turbo mode reduces the battery life by half.