User Manual - Ring Light

Matrix Light ML-115R LED Ring Light ••• 22
••• USING AND CHARGING THE BATTERY
How to Use and Charge the Battery •••
1. Connecting the ML-115R LED Ring Light to Battery
a. Connect the power cable (ML-PC1) to the battery's DC power jack.
b. Connect the other end of the power cable (ML-PC1) to the LED Light's
power connector.
c. Turn on the ML-115R LED Ring Light.
2. Charging the Battery
a. Unplug the power cable (ML-PC1) from the battery's DC power jack.
b. Plug the battery charger (ML-CHG1) into an AC outlet. Connect the
charger plug to the battery's DC power jack. When charging the battery
the charger's indicator LED will turn red.
c. When the battery is fully charged, the charger's indicator LED turns green
from red. Unplug the fully charged battery from the charger (ML-CHG1).
⚠ Warning: Only use the designated battery charger (ML-CHG1). Using other chargers can damage
the battery and create an explosion hazard.
⚠ Caution: If the battery’s DC terminals are shorted out by a metallic object, the battery's short
circuit protection system cuts off the battery's power immediately. To reactivate the
battery, simply charge the battery for a few seconds.