User Manual- ML-9

Matrix Light ML-9 LED Ring Light ••• 15
when you store current values) and which memory was used.
- Battery level warning LED
When the battery level drops below 15%, the battery warning indicator
lights up. In this case, recharge the battery as soon as possible. Matrix
Light’s ML-BA12 Li-ion battery does not suffer from a memory effect, so
frequent charging is recommended. In fact, completely discharging the
battery will drastically reduce the capacity of the battery and should be
avoided.
- Manual/Auto indicator LED (Camera Cue/Cut synchronization)
When the light is connected to an ENG Camera power source, its operation
can be synchronized with the Cue/Cut button operation of the ENG camera
utilizing the ENG camera’s Power Remote function. When the Auto mode
indicator LED becomes active, the LED light’s power switch function will be
disabled (The LED light always turns on).
To turn on the Auto mode, press and hold the power and brightness switch
for three or more seconds. Repeat the procedure to switch off the Auto
mode.
- Power indicator LED
Shows the power on/off state of the ML-9 LED Light
- Turbo mode indicator LED
Indicates that Turbo mode is now active.
In Turbo mode, the color temperature controls are disabled. (Always set on
4,500K color temperature)