User Manual- ML-9

Matrix Light ML-9 LED Ring Light ••• 22
3. To replace the battery during filming
a. Unplug the power cable (ML-PC1) from the battery's DC power jack.
b. Release the attachment screw and pull out the L-Slide and battery.
c. Hold and grip the L-Slide then lift up the battery.
d. Hold the L-Slide and install new battery.
e. Reinstall the L-Slide and battery on the camera.
f. Plug in the power cable (ML-PC1) to the battery's DC power jack.
* When you pull out the battery from "L"type slide, grip each side of the
slide firmly to pull the battery out easily.
••• TROUBLESHOOTING
Points to check •••
If the Light or battery is not working properly, check the trouble shooting
points first. When the problem is not solved, contact the nearest dealer or
Matrix Light service center.