User guide

9.2 Auto Transmit Key Presses On
Syntax
Hexadecimal 0xFE 0x41
Decimal 254 65
ASCII 254 “A”
Description In this mode, all key presses are sent immediately to the host system
without the use of the poll keypad command. This is the default mode
on power up.
NOTE This command is not available in I
2
C.
Remembered Yes
Default On
9.3 Auto Transmit Key Presses Off
Syntax
Hexadecimal 0xFE 0x4F
Decimal 254 79
ASCII 254 “O”
Description In this mode, up to 10 key presses are buffered until the unit is polled by
the host system, via the poll keypad command 254 38. Issuing this
command places the unit in polled mode.
NOTE This command is not available in I
2
C.
Remembered Yes
9.4 Poll Key Press
Syntax
Hexadecimal 0xFE 0x26
Decimal 254 38
ASCII 254 “&”
Matrix Orbital GLK240128-25 34