User's Manual

Page | 3
Getting Started
Place the speaker in your preferred
position but within reach of a wall
socket.
With the mains socket in the OFF position, connect the a/c lead to
the speaker using only the supplied mains leads and power supply.
Turn the mains socket ON.
Your WS10
i
has been supplied with two
cables to enable connection to your
source devices.
Devices with 3.5mm headphone out socket (e.g. Mp3 player) 3.5 -
3.5 cable
Connect one end of the 3.5mm to 3.5mm cable to your device with
headphone out and the other end to the Line In on the rear of the
WS10i loudspeaker.
Devices with RCA sockets (e.g. CD player) 3.5 to RCA cable
Connect the 3.5mm jack to Line In on the rear of the loudspeaker
and the RCA (red/white) plugs to the source device.
Once a connection is made to Line In, music can be played through
the WS10i
Where the (optional) WST transmitter is used, ensure Line In on the
rear of the loudspeaker is not connected.
201205-WS10i說明書NEW.indd 3 2012/7/3 下午 04:49:44