User's Manual

Page | 5
To use your speakers with a PC or
MAC
MAC set-up
1.Insert the USB connector from the transmitter to a free
USB socket on your MAC.
2.Go to System Preferences and under Hardware choose
Sound.
3.Click Output in Menu and choose USB headset.
PC set-up
1.Insert the USB connector from the transmitter to a free
USB socket on your PC or laptop.
2.Wait until the software has been installed, usually a
confirmation beep or message window alert.
If the above instructions do not work you may need to do the
following.
Click Start button on PC, go to the Control Panel, and
choose Sound & Sound Devices
Under Playback of Audio; Default unit choose USB headset.
If you are still having problems please contact
[e-mail].
To use your speaker with other
devices (RCA connection)
The transmitter needs to be powered; by using the USB
connector on a PC for example, power is provided.
To use the transmitter with equipment that does not have a
USB socket the mains adapter is required.
Connect the USB connector from the transmitter to the USB
socket on the supplied mains adapter.
Using the “line out” cable provided, plug the red and white
plugs (RCA) into your device with line out, e.g. CD player
or TV, connect the other end of the cable (mini jack) to the
transmitter.
Plug the adapter into to a convenient wall socket and turn
on.
Push the button in the centre of the transmitter to select a
free zone.
Using the remote control press the “station” button” to find
the signal from the new source equipment.
201205-WS10i說明書NEW.indd 5 2012/7/3 下午 04:49:44