Specification

ManualsBrandsMatrix ManualsStorage & Organization24 in. L Titanium Shelf Bracket

82 Series Standard &

182 Series Bracket System

Applications Commercial: schools, hospitals, ofﬁces, libraries, retail

stores, businesses, and more. Home: ofﬁce, garage, living

areas, pantries, storage and display areas, and more.

Load Rating Varies per size*

Mounting Wall

Material 14- and 16-gauge Steel Construction

Finishes Almond (ALM), Black (BLK), Titanium (TI), White (WH):

Attractive, long-lasting, corrosion resistant ﬁnishes.

Features Standards can be mounted to any type of wall.

82 Series Standards and 182 Series Brackets offer

smooth and rounded corners, giving a softer and

less intrusive appearance without compromising the

strength needed to hold heavy loads. The recessed

groove design provides a streamlined surface where

the bracket meets the standard. Double-lug bracket

design helps prevent shelves and contents from

falling if bumped. A broad range of standard and

bracket sizes support virtually any size shelf, from 6"

to 24" deep. Brackets are vertically adjustable in 1-1/4"

increments. Accessories include bookends, bracket

locks, locators/joiners, and screws/anchors.

82 Series Standards

• Dimensions: 1-1/16" wide x 11/16" deep x

selected length

• 14-gauge steel construction

• Made in the USA

• Available from open stock

182 Series Brackets

• 16-gauge steel construction

• Vertically adjustable in 1-1/4" increments

• Available from open stock

* Consult KV Customer Service for information.

Heavy-Duty

Up to 450 lbs./pair*

Double Slot Design

Adjustable in 1-1/4" Increments

Knape & Vogt

, 2700 Oak Industrial Drive NE, Grand Rapids, MI USA 49505 | P 616.459.3311 | 800.253.1561 | F 616.459.3290 | www.kv.com

Summary of content (4 pages)

PAGE 1
Heavy-Duty Up to 450 lbs./pair* Double Slot Design Adjustable in 1-1/4" Increments 82 Series Standard & 182 Series Bracket System Applications Commercial: schools, hospitals, offices, libraries, retail stores, businesses, and more. Home: office, garage, living areas, pantries, storage and display areas, and more.
PAGE 2
82 Series Standard & 182 Series Bracket System 82 Series Standards Standard Pack (10/box. UPC labels attached.) Size Almond (ALM) 16.5" 82 ALM 16.5 28" 82 ALM 28 39" 82 ALM 39 48" 82 ALM 48 63" 82 ALM 63 78" 82 ALM 78 94" 82 ALM 94 Builders Pack (BP) (10/display carton. No UPC labels.) Size Almond (ALM) 16.5" 82BP ALM 16.5 28" 82BP ALM 28 39" 82BP ALM 39 48" 82BP ALM 48 63" 82BP ALM 63 78" 82BP ALM 78 94" 82BP ALM 94 Black (BLK) 82 BLK 16.
PAGE 3
82 Series Standard & 182 Series Bracket System 182 Series Brackets Standard Pack (10/box. UPC labels attached.) Size Almond (ALM) 5" – 7" 182 ALM 7 9" 182 ALM 9 10.5" 182 ALM 10.5 12.5" 182 ALM 12.5 14.5" 182 ALM 14.5 18.5" 182 ALM 18.5 24" 182 ALM 24 Almond (ALM) Black (BLK) Black (BLK) – 182 BLK 7 182 BLK 9 182 BLK 10.5 182 BLK 12.5 182 BLK 14.5 182 BLK 18.5 182 BLK 24 Builders Pack (BP) (10/display carton. No UPC labels.
PAGE 4
82 Series Standard & 182 Series Bracket System 5. Installation 1. Locate the wall studs, which are generally found at 16" intervals. Position the standard (A) and mark the location of the uppermost screw hole on the wall. Drill a 5/32" pilot hole for attaching into stud, or for attachment to drywall, drill a 5/16" pilot hole for supplied drywall anchor. Attach the standard to the wall using a screw (and anchor) (82DP SCREW ZC) (D). Do not fully tighten. 2.