Instructions / Assembly

M
A
D
E
F
R
O
M
R
E
C
Y
C
L
E
D
P
L
A
S
T
I
C
5
Matrix Wall Art
Made in Australia
From recycled plastic.
www.designow.com.au
8 Silkwood Rise Carrum Downs
Vic 3201 Australia
Tel: [phone]
Fax: [phone]
Email: sales@designow.com.au
Matrix Wall Art oers the perfect blend of contemporary styling,
durability and low maintenance. The versatility and style of these
decorative panels make them suitable for installation both indoors
and outdoors, and creating an interesting feature in what may be a
blank space.
Matrix Wall Art is suited to all climatic conditions and will never rot,
rust, swell or leach out their colour. These panels are not aected
by continuous exposure to moist, salty air and will not stain walls
or paving.
Fade resistant materials are used to ensure that Matrix Wall Art will
never need painting. Painting is not recommended as conventional
paints will not adhere to Matrix Wall Art.
Attractive designs of Matrix Wall Art allow an artistic installation
suited to residential and commercial properties. All Matrix Wall Art
can be further enhanced with background or recessed lighting.
• Available in 8 attractive contemporary designs
• Made in Australia from 100% recycled plastic
• Will not rot, rust or need painting
• Do not contain harmful chemicals
• Resistant to mould and insects
• No sharp edges
• Covered by a 15 year structural warranty
THERMAL EXPANSION AND CONTRACTION
All plastic products will expand and contract with changes in
temperature. If no allowance is made for thermal expansion
and contraction during installation, this may cause damage
to the product and void the warranty. The gures below show
approximate panel size variation due to temperature changes:
22.8” x 22.8” 45.7” x 22.8”
At 32ºF 22.7” x 22.7” 45.5” x 22.7”
At 68ºF 22.8” x 22.8” 45.7” x 22.8”
At 104ºF 22.9” x 22.9” 45.9” x 22.9”
Expansion Gap: 0.2” x 0.2” 0.4” x 0.2”
Detailed instructions are available on our website:
www.designow.com.au
NOTE: These products are not approved for use as pool fencing.
VERSATILE IN APPLICATION. EASY TO INSTALL.
Whatever your application, there is a simple installation method to
provide the exibility and ease of installation you need to create
your outdoor masterpiece.
Installation in a at (ceiling) position is not recommended and any
resulting distortion will not be covered by the warranty.
WIRE ROPE SLING WITH
HOOK SCREWS
OVERSIZED HOLE WITH
PAN HEAD SCREWS
OVERSIZED HOLE WITH SPACER
AND PAN HEAD SCREWS
BALL CHAIN WITH PAN HEAD SCREWS
INSTALLATION:
FIXING METHODS
Installing Matrix Wall Asrt Panel using one of our recommended
methods will ensure a professional and durable nish.
Note: Our 15 year Warranty only applies when the panel has been
installed in accordance with our installation instructions.
Detailed installation instructions can be downloaded from
www.designow.com.au; these instructions must be carefully
followed in accordance with the Warranty conditions.
INSTALLATION OPTIONS
There are several simple installation options that will ensure a
professional and durable nish:
• Using a ball chain (supplied). Attach clips to the end of the ball
chain. Mark the centre of the panel on the back using a tape
measure, then mark screw positions equal distance from the
centre. Secure the ball chain to the panel using the supplied
screws.
• Using screws and washers – screw holes in the panel must be
larger than the screws by 1/8” to allow fthe panel to expand
and contract.
• Within a timber frame with grooved timbers or beading. Use
3/8” minimum groove depth and allow at least 1/4” for vertical
and 1/8” for horizontal thermal expansion.
Using spacers to set the panel o the wall or fence will create a
more 3-dimensional installation with shadow eects. Backlighting
can be used to further enhance this eect.
INSTALLATION OPTIONS: