User manual

MOUNTING WIRING AND INSTALLATION
2-4 MATRIX BACnet Router User Manual (6/6/2007)
2.2 MOUNTING
The MATRIX BACnet Router ships with an approved enclosure consistent with most electrical standards
and regulations. The product is intended for indoor applications only and should be installed in a location
that is dry, away from direct sunlight and free from excessive dust, vibration, and electrical interference.
Figure 2-2 Mounting Dimensions for MATRIX BACnet Router
NOTE
All equipment must be installed in accordance with
NEC and local codes. For more information on
local codes, please check state/local regulations in
your area.
CAUTION
To prevent damage to any of the electrical
components of MATRIX Router and to ensure that
it continually operates, do not attept to alter any
componentry of the product.
ELECTRICALRATINGS:
PowerInputs:Class 2, 12-29VDC / VAC50/60 Hz; Nominal 2.7A maximum
PowerOutputs:Class 2 IOX =Power in 1.35A maximum
CommunicationSignals:RS-232 Class 2,±15VDC maximum; RS-485 Class 2,5VDC maximum
SSB,12VDC 50 mA maximum
ENVIRONMENT:Temperature Ratings:: to 50° C Humidity; 0 to 80% RH non-condensing
UseCopperConductorsOnly
Caution: Terminalblock torque 3 inchpound maximum
This devicecomplies with part 15 of the FCC rules.
Operation issubject to the following two conditions:
(1)Thisdevicemaynotcauseharmfulinterference.
(2)Thisdevicemustacceptanyinterferencethat
may causeundesired operation.
(583a) ©American Auto-Matrix, LLC.2006
80M7,OPEN ENERGYMANAGEMENT EQUIPMENT.
SeeReference Manual No.
1E-04-00-0123for Instructions foruse
U
R
Matrix-
Router
PWR PWR
12-29VDC/VAC
2.7A(MAX)
J1
J4
LINE
J3
RS-485
TXD
RXD
PERR
BERR
N+
N-
SH
J2
SW3
TERM
BIAS
J5TELCO
N+
N-
SH
61
SW2
TERM
BIAS
RS-485
TXD
RXD
PERR
BERR
3.3V
5V
24V
A
U1
S2S1
SW1
ATTN
U2
RS-232
STATUS2 STATUS1 User Button
Power Input
PWR
PWR
RS-485
NET
NET
SH
+
-
RS-485
NET
NET
SH
+
-
USB
10 /100
Ethernet
TerminationOff
(FactoryS etting)
Biased
(FactoryS etting)
RS-485 Biasing-
SW2.2 andSW3.2
RS-485Termination -
SW2.1 andSW3.1
TERM
BIAS
11.00 inches
11.00 inches