Instruction Manual

9
EMERGENCY STOP
EMERGENCY STOP
AUTO-STOP SENSOR
PROPER USAGE
MOUNTING THE CLIMBMILL
1. There are two EMERGENCY STOP BUTTONS on the ClimbMill. One emergency
stop button is located at the top of the handlebars and the second is located
on the lower right side handlebar. The EMERGENCY STOP BUTTONS
will bring the step surfaces to a complete stop when pressed.
2. The AUTO-STOP SENSOR will bring the step surfaces to a complete
stop upon detecting an object under the bottom step.
3. Stand directly behind the ClimbMill on the rear platform. Grasp the handlebars
and step onto the ClimbMill until you are within comfortable reach of the
console, top emergency stop lever, and in-reach handlebar controls.
4. To determine proper workout position, stand on the steps within comfortable
reach of the console. Maintain a constant distance from the console and in-
reach handlebar controls. Keep your knees slightly bent at all times.
5. Dismounting the ClimbMill - After the steps have come to a complete stop
and while grasping the handlebars, step down onto the rear platform.
USING THE HEART RATE FUNCTION
The heart rate function on this product is not a medical device. While heart rate grips can provide
a relative estimation of your actual heart rate, they should not be relied on when accurate readings
are necessary. Some people, including those in a cardiac rehab program, may benefit from using an
alternate heart rate monitoring system like a chest or wrist strap. Various factors, including movement
of the user, may affect the accuracy of your heart rate reading. The heart rate reading is intended
only as an exercise aid in determining heart rate trends in general. Please consult your physician.
WARNING!
Heart rate monitoring systems may be inaccurate. Over exercising may result in
serious injury or death. If you feel faint, stop exercising immediately.
ENGLISH