Specifications

2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1
LCD
1 2 3 4 5 6
This monitor displays your setting information with each input
and output selection.
2
POWER button & LED
Press this button to turn on the device and the green LED will
illuminate when the power is on. When the LED illuminate in red it is
in standby mode
3
LOCK button & LED
Press this button to lock all the buttons on the panel. To unlock, just
press it again.
4
IR
This IR window accepts the remote control signal of this device
only.
5
MENU
Press this button once to select EDID setting from STD
(internal) 1 or TV (external) 2 then press it again to confirm
the selection. Press this button every to confirm the
selection.
EDID TV: The device will read the EDID of HDMI output A and
record it.EDID STD: The device's built-in EDID is 1080p@60/12bits
forvideo and LPCM 2CH for Audio.
6
1 ~8 /A ~ H & Out/In buttons
Press Out/In button first to select the output/input then press
the number button to make the selection accordingly. For