CMSI-8H8HS 8 x 8 HDMI Matrix Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction ���������������������������������������������� 1 2. Applications ��������������������������������������������� 1 3. Package Contents ���������������������������������� 1 4. System Requirements ������������������������������ 1 5. Features ���������������������������������������������������� 1 6. Operation Controls and Functions ��������� 2 6.1 Front Panel ������������������������������������������2 6.2 Rear Panel �������������������������������������������3 6.
1. INTRODUCTION The 8 x 8 HDMI Matrix is a fabulous device for organizing and distributing your HDMI signals. With 8 HDMI input ports and 8 HDMI output ports this device allows a great amount of sources and display to be used motivationally. Moreover, with plenty of control systems such as IR, RS-232 and remote control allow user for all kinds of control habit and occasion to be used. Further, the EDID control settings unlocked the information display freely present. 2.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel 1 2 3 4 5 6 1 LCM This monitor displays your setting information with each input and output selection. 2 POWER button & LED Press this button to turn on the device and the green LED will illuminate when the power is on. When the LED illuminate in red it is in standby mode 3 LOCK button & LED Press this button to lock all the buttons on the panel. To unlock, just press it again.
example, output A ~ D wish to select input 1 and E ~ H wish to select input 2. Press Out →A→B→C→D→In→1→Menu, and then press Out →E→F→G→H→In→2→Menu. If the menu button is not press the selection will not be changed. 6.2 Rear Panel 1 2 3 4 5 6 7 1 LAN Reserved. 2 RS-232 This slot is to connect with D-Sub 9pin cable from the PC/NB device for RS-232 control. 3 IR-IN This slot is to connect with the IR extender included in the package for IR signal receiving from the remote control of this device.
7 DC24V This slot is to plug the power cord with adaptor included in the package and then connect them with AC wall outlet for power supply. 6.3 Side Panel 1 1 VENTILATOR These are fan ventilator area, DO NOT block these area or cover it with any object. 6.4 Remote Control 1 Power Press this button to switch on the device or set it to standby mode. 2 IN Input ports selection 1~8. 3 OUT Output ports selection A~H.
6.
6.6 RS-232 Commands Command Description A1~A8 Switch output A to 1~8 B1~B8 Switch output B to 1~8 C1~C8 Switch output C to 1~8 D1~D8 SWITCH OUTPUT D TO 1~8 E1~E8 SWITCH OUTPUT E TO 1~8 F1~F8 SWITCH OUTPUT F TO 1~8 G1~G8 SWITCH OUTPUT G TO 1~8 H1~H8 SWITCH OUTPUT H TO 1~8 ABCD...1~ABCD...8 SWITCH OUTPUT ABCD...
7.
8. SPECIFICATIONS Maximum TMDS Bandwidth 6.75 Gbps Input Ports 8 x HDMI, 1 x IR, 1 x RS-232, 1 x mini USB B type (for firmware update only), 1 x RJ-45 (LAN) Output Ports 8 x HDMI ESD Protection Human body model: ± 8kV (Air-gap discharge) ± 4kV (Contact discharge) Power Supply 24V/6.
9.
10
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.