PREMIUM SERIES CYCLES Premium_cycle_090326.
Premium_cycle_090326.
Table of Contents CHAPTER 1: IMPORTANT SAFETY INSTRUCTIONS 1.1 1.2 1.3 1.4 Read and Save These Instructions .................................................................. Setting up the Cycle ...................................................................................... Installation Requirements .............................................................................. Grounding Instructions ..................................................................................
CHAPTER 1: Important Safety Instructions 1.1 READ AND SAVE THESE INSTRUCTIONS • This cycle is intended for commercial use • To insure your safety and protect the equipment, read all instructions before operating the MATRIX Cycle. • Unsupervised Children must be kept away from this equipment When using an electrical product, basic precautions should always be followed, including the following: • Always unplug this equipment from the electrical outlet immediately after using and before cleaning.
CHAPTER 2: Preventative Maintenance 2.1 CARE AND MAINTENANCE INSTRUCTIONS 2.2 ELECTRICAL REQUIREMENTS In order to maximize life span, and minimize down time, all MATRIX equipment requires regular cleaning, and maintenance items performed on a scheduled basis. This section contains detailed instructions on how to perform these items, the frequency of which they should be done, and a check list to sign off each time service is completed for a specific machine.
CHAPTER 2: Preventative Maintenance 2.3 PREVENTATIVE MAINTENANCE CHECKLIST 2.4 RECOMMENDED CLEANING TIPS Facility: Preventative maintenance and daily cleaning will prolong the life and look of your MATRIX Cycle. MAKE: MODEL: LOCATION: TECHNICIAN: Please read and follow these tips. S/N DATE: • Position the equipment away from direct sunlight. The intense UV light can cause discoloration on plastics. • Locate your equipment in an area with cool temperatures and low humidity.
CHAPTER 3: Adjusting The Seat / Manager Mode 3.1 RECUMBENT SEAT HEIGHT 3.4 USING MANAGER PREFERENCE MODE To adjust the seat height on the Recumbent Cycle, locate the yellow lever under the right side of the seat before you mount the Cycle. Place your right hand on the orange adjustment handle under the right side of the seat. Place feet on the ground while seated and slide forward if needed. Place feet on pedals, gently lift lever under the right side of the seat.
CHAPTER 4: Serial Number Location 4.1 RECUMBENT CYCLE 4.4 UNIVERSAL CONSOLE SERIAL NUMBER LOCATION SERIAL # PLACEMENT 4.2 UPRIGHT CYCLE SERIAL # PLACEMENT 4.3 HYBRID CYCLE™ SERIAL # PLACEMENT 7 Premium_cycle_090326.
CHAPTER 5: R5x, U5x, H5x Overlay And Workout Description 5.1 R5x, U5x, H5x CONSOLE DESCRIPTION The MATRIX cycle is inspected before it is packaged. It is shipped in two pieces: the base and the console. Carefully unpack the unit and dispose of the box material. WORKOUT KEYS: Simple program view and selection buttons. GO: One touch Start. ENTER: To confirm each program setting. UP/DOWN LEVEL: Easy information and level selection. UP/DOWN TIME: Easy information and time adjustment.
CHAPTER 5: R7x, U7x, H7x Overlay And Workout Description R7x, U7x, H7x CONSOLE DESCRIPTION The MATRIX cycle is inspected before it is packaged. It is shipped in two pieces: the base and the console. Carefully unpack the unit and dispose of the box material. MULTI-PURPOSE KEYS: Keys have different functions depending on each screen. GO: One touch Start. ENTER: To confirm each program setting. UP/DOWN LEVEL: Easy information and level selection. UP/DOWN TIME: Easy information and time adjustment.
CHAPTER 5: R7xe, U7xe, H7xe Overlay And Workout Description R7xe, U7xe, H7xe CONSOLE DESCRIPTION The MATRIX cycle is inspected before it is packaged. It is shipped in two pieces: the base and the console. Carefully unpack the unit and dispose of the box material. The R7xe, U7xe, H7xe has a full integrated touch screen display. All information required for workouts is explained on screen. Exploration of the interface is highly encouraged.
CHAPTER 5: Cycle Overlay And Workout Description 5.2 MANUAL WORKOUT OPERATION QUICK START OPERATION Press the GO button and the cycle will enter into a manual mode of operation. All energy expenditure values will be calculated using the default wight measurement. MANUAL WORKOUT OPERATION Manual is a workout that allows you to manually adjust the level values at anytime. The manual workout also contains a setup screen which allows you to input your weight to help calculate a more accurate caloric burn rate.
CHAPTER 5: Cycle Overlay And Workout Description 5.5 FIT TEST This test measures cardiovascular fitness and proves an estimated sub-maximal VO2 result. It is based on power output according to ACSM standards and was developed by the Cooper Institute (© www.cooperinstitute.org) User RPMs must remain between 60-80 RPM during the test. The test will end when the user can no longer maintain this speed. Use of a heart rate strap is optional but provides more data.
CHAPTER 6: Recubment Cycle Specifications, Parts R7xe and Assembly Steps R7x R5x Features Contact & telemetric HR sensors Yes Yes Yes Handlebar design Ergonimically designed handrails Ergonimically designed handrails Ergonimically designed handrails Integrated arm rests Seat side and front horizontal ergo bend Seat side and front horizontal ergo bend Seat side and front horizontal ergo bend Thumb switch controls Yes Yes Yes Technology JID brushless generator JID brushless generator
CHAPTER 6: Recumbent Cycle Specifications, Parts And Assembly Steps 5.
CHAPTER 6: Recumbent Cycle Specifications, Parts And Assembly Steps 6.3 R7xe, R7x, R5x RECUMBENT CYCLE ASSEMBLY STEPS STEP 2 STEP 1 Z31 Z33 Z32 Z22 Z23 Z21 Z22 Z23 Z21 15 Premium_cycle_090326.
CHAPTER 6: Recumbent Cycle Specifications, Parts And Assembly Steps 6.3 R7xe, R7x, R5x RECUMBENT CYCLE ASSEMBLY STEPS STEP 3 STEP 4 AC2 Q08 Z43 P04 Z44 Z12 Z11 Z13 Z34 Z41 Z44 D55 D57 Z55 Z45 D80 Z42 D10 16 Premium_cycle_090326.
CHAPTER 6: Recumbent Cycle Specifications, Parts And Assembly Steps 6.3 R7xe, R7x, R5x RECUMBENT CYCLE ASSEMBLY STEPS STEP 5 FINAL ASSEMBLY Z41 CONSOLE SCREW 17 Premium_cycle_090326.
CHAPTER 7: Upright Cycle Specifications, Parts And Assembly Steps U7xe U7x U5x Features Contact & telemetric HR sensors Yes Yes Yes Handlebar design Full racing style with elbow support Full racing style with elbow support Full racing style with elbow support Thumb switch controls Yes Yes Yes Technology JID brushless generator JID brushless generator JID brushless generator Power requirements 120v/60Hz AC power Self-powered/120v/60 Hz AC power option Self-powered/120v/60 Hz AC power o
CHAPTER 7: Upright Cycle Specifications, Parts And Assembly Steps 7.
CHAPTER 7: Upright Cycle Specifications, Parts And Assembly Steps 7.3 U7xe, U7x, U5x UPRIGHT CYCLE ASSEMBLY STEPS STEP 2 STEP 1 Z42 Z43 Z41 Z22 Z23 Z21 Z22 Z23 Z21 20 Premium_cycle_090326.
CHAPTER 7: Upright Cycle Specifications, Parts And Assembly Steps 7.3 U7xe, U7x, U5x UPRIGHT CYCLE ASSEMBLY STEPS STEP 4 STEP 3 Z51 Z52 2 G12 6 2 Z12 Z11 Z31 Z32 Z33 Z13 21 Premium_cycle_090326.
CHAPTER 7: Upright Cycle Specifications, Parts And Assembly Steps 7.3 U7xe, U7x, U5x UPRIGHT CYCLE ASSEMBLY STEPS FINAL ASSEMBLY STEP 5 CONSOLE SCREW C22 Z34 C11 22 Premium_cycle_090326.
CHAPTER 8: Hybrid Cycle Specifications, Parts And Assembly Steps H7xe H7x H5x Features Contact & telemetric HR sensors Yes Yes Yes Handlebar design Front vertical ergo bend Front vertical ergo bend Front vertical ergo bend Integrated arm rests Yes Yes Yes Thumb switch controls Yes Yes Yes Technology JID brushless generator JID brushless generator JID brushless3generator Power requirements 120v/60Hz AC power Self-powered/120v/60 Hz AC power option Self-powered/120v/60 Hz AC power o
CHAPTER 8: Hybrid Cycle Specifications, Parts And Assembly Steps 8.
CHAPTER 8: Hybrid Cycle Specifications, Parts And Assembly Steps 8.3 H7xe, H7x, H5x HYBRID CYCLE ASSEMBLY STEPS STEP 2 STEP 1 AC1 Q05 Z31 Z33 Z32 Z22 x4 AJ1 Z23 x4 Z21 x4 AJ2 Z22 x4 Z23 x4 Z21 x4 25 Premium_cycle_090326.
CHAPTER 8: Hybrid Cycle Specifications, Parts And Assembly Steps 8.3 H7xe, H7x, H5x HYBRID CYCLE ASSEMBLY STEPS STEP 3 STEP 4 Z42 P02 P11 AC2 AD4 C21 Q07 Z51 Z52 Z53 Z43 Z41 Z42 D43 Z13 Z11 Z12 Z42 Z43 Z41 26 Premium_cycle_090326.
CHAPTER 8: Hybrid Cycle Specifications, Parts And Assembly Steps 8.3 H7xe, H7x, H5x HYBRID CYCLE ASSEMBLY STEPS STEP 5 STEP 6 CONSOLE SCREW P02 P20 P06 P11 Z34 C11 T09 T09 T08 T08 27 Premium_cycle_090326.
M AT R I X F I T N ESS SYST E M S | 1 61 0 L A N D M A R K D R I V E COT TAG E G ROV E W I 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 PA RT # 0 0 0 0 0 8 8 1 84 REV. 1.3 Premium_cycle_090326.
