Technical data

SINAUT TD7 software package for the CPU
2.5 Data point typicals
Software
System Manual, 07/2009, C79000-G8976-C222-07
233
No parameter
specified
Default value FALSE is valid
The NewData output is intended for user-specific further processing, for
example to react in a specific way to receipt of new data.
The following data point typicals use the parameter:
Bin04B_R, Ana04W_R, Cnt01D_R/Cnt04D_R, Cmd01B_R, Set01W_S,
Set01W_R, Par12D_S, Par12D_R, Dat12D_R
Whenever the FB has received new data and has output it to the outputs for
the specific typical, the NewData output is set to TRUE for one OB1 cycle.
You will find the relevant outputs for the specific typical under "NewData" in
the description of the individual data point typicals.
With the data point typicals "Set01W_R" and "Par12D_R", NewData is also
set to TRUE for one OB1 cycle if there is a new local entry in the Local = 1
state.
If you do not require the parameter, simply leave it open.
2.5.2 ST7 binary information typical FB Bin04B_S
Function
Send 4 bytes of messages/binary information
Explanation of the parameters
Names: PartnerNo
PartnerObjectNo
Enabled
ImageMemory
Conditional
Unconditional
Permanent
TimeStamp
Refer to
Parameters you require often (Page 223).
Name: InputByte_1 … _4
Declaration: INPUT
Data type BYTE
Default: 0 (B#16#0)
Explanation Input byte