Specifications

45
9.11 SPEED SENSOR REPLACEMENT
CHAPTER 9: PART REPLACEMENT GUIDE
1) Unplug treadmill.
2) Remove front shroud as outlined in Section 9.1.
3) Remove speed sensor from the left side of the motor using a Phillips screwdriver (Figure A).
4) Cut the wire ties holding the speed sensor wire to the motor and MCB (Figures B & C).
5) Unplug speed sensor from MCB (Figure D).
6) Auto Calibration must ALWAYS be run after installation of a new speed sensor.
FIGURE A
FIGURE B
FIGURE C FIGURE D