Specifications

59
10.3 ASSEMBLY INSTRUCTIONS
CHAPTER 10: TREADMILL SPECIFICATIONS AND ASSEMBLY GUIDE
STEP 1
STEP 2
Z51
Z51
Z50
Z52
10
14
STEP 1
STEP 2
Z51
Z51
Z50
Z52
10
14
ATTENTION
After assembly and installation is complete, the treadmill will need to be calibrated using the auto-calibration procedure oulined in Section 3.5. DO NOT
stand on the belt while the auto-calibration sequence is in progress.
Prior to assembling the treadmill, unpack all of the contents of the box and make sure that all necessary components are present. Review the
contents of the hardware package for completeness. Contact Matrix customer service at 866.693.4863 to report any missing items.
ASSEMBLY INSTRUCTIONS
Please make sure that the power plug is not plugged into the wall outlet while completing the following procedure.
To ensure correct assembly of the treadmill, carefully read and follow these steps:
Remove the motor cover(s) and set aside. The motor cover(s) need to be
removed to gain access to the motor compartment so that wire harness
connections can occur.
Open Black Assembly Bag. Assembly both the left and right console masts
to the treadmill base using item 10 socket head cap screw and item 14
washer.
STEP 1
STEP 2