User Manual
Table Of Contents
- Chapter One Introduction
- Chapter II Technical Specifications
- Chapter IV Panel Operation
- 4.1 Basic operation mode
- 4.2 dynamic test operation
- 4.3 input control
- 4.4 Electronic load operating range
- 4.5 protection function
- 4.6 remote test function
- 4.7 battery discharge test operation
- 4.8 Communication Protocol
8
TEST CURRENT
Test current
TEST VOLTAGE
Test voltage
TEST POWER
Test the power
TEST RESI
Test resistance
DELAY TIME
Test delay time (0.2 ~ 25.5S)
INPUT xxxx
Enter the setting parameters, such as CC mode 1A
MINIMUM xxxx
Enter the lower limit of the test parameter
MAXIMUM xxxx
Enter the test parameter limit
SETUP AUTO TEST
TRIGGER
Trigger output selection
WHEN PASS
When the test is passed, the trigger output is activated
WHEN FAIL
When the test fails, the trigger output is activated
WHEN TEST END
When the test is completed, the trigger output is
activated
DISABLE
Prohibit triggering output
OUTPUT
Output electrical characteristics of choice
PULSE
Pulse output
LEVEL
Level output
EXIT
EXIT