User Manual
Table Of Contents
- Chapter One Introduction
- Chapter II Technical Specifications
- Chapter IV Panel Operation
- 4.1 Basic operation mode
- 4.2 dynamic test operation
- 4.3 input control
- 4.4 Electronic load operating range
- 4.5 protection function
- 4.6 remote test function
- 4.7 battery discharge test operation
- 4.8 Communication Protocol
1
Chapter One Introduction
The PEL-8000 series is a new generation of DC electronic load. It adopts high performance chip, high speed and
high precision design. It can provide the resolution of 0.1mV and 0.01mA (the basic accuracy is 0.05% and the basic
current rising speed is 2.5A /us) Novel, rigorous scientific production process, compared to similar products, more
cost-effective. Widely used in production lines (cell phone charger, cell phone batteries, electric car batteries,
switching power supply, linear power), research institutions, automotive electronics, aerospace, shipbuilding, solar
cells, fuel cells and other industries.
Main features
Constant current, constant resistance, constant voltage, constant power, constant current + constant voltage,
constant resistance + constant voltage, six kinds of high-speed action mode;
Overcurrent, overvoltage, over power, overheating, reverse polarity protection
High brightness, vacuum, VFD screen, double row, four simultaneous display;
According to temperature change, stepless servo, intelligent fan system;
LOAD ON time setting, LOAD ON voltage setting;
Battery test and short circuit function;
Provide dynamic testing, rising and falling slope setting;
Provide arbitrary waveform editing capabilities (LIST function);
Support automatic test function
Support external trigger input, output;
Provide external current waveform monitoring terminal;
Support remote voltage compensation, multiple data storage;
POST, standard instrument rack design;
Support GPIB, RS232, RS485, USB communication.