User Manual

Table Of Contents
6
3.4 keyboard instructions
0 ~ 9 for the number of input keys
Cancel button, you can exit in any working state
CC
Select constant current mode, set current output value
CV
Select the constant voltage mode, set the voltage output value
CP
Select the constant power mode, set the power output value
CR
Select the constant resistance mode, set the resistance output value
Shift composite key
Load on / off
Move the key and select menu item in menu operation
Move the key to select the menu item in the menu operation
Enter
3.5 menu operation
Press Shift + Menu key to enter into menu function. At this time VFD displays selectable menus. Use up / down
operation keys and or knob to turn VFD screen, the following functions will appear in sequence. Press the
Enter key at this time and you will be taken to the function selection where the cursor is. You can use the up / down
keys and or the knob to turn the VFD screen. Press the Enter key to enter the next submenu. Press Esc to
return to the previous menu.
MENU
CONFIG
INPUT RECALL
Set the input state at load power-on as the state at the
last shutdown or OFF state
ON
When the load is turned on, it will be restored to the
state before shutdown.
OFF
When the load is turned on, the input status is OFF
and the working mode is CC.
KEY SOUND SET
Keyboard sound settings
ON
Keyboard sound
OFF
Keyboard no sound
CONNECT MODE
Connection mode
MAXTIDLEXING
Multiple units
SEPARATE
Single
BAUDRATE SET
Set the communication baud rate
2400
9600
14400
28800
57600
115200