Product specifications

4.6 ASSEMBLY STEPS R1x

REAR FOOT

1) Install the rear foot in position at the rear of the bike with the mating

holes in the frame bracket. Insert the four screws (Z04) through the frame

bracket and rear foot. Using a #5 Allen Wrench tighten the

screws securely.

PEDALS

1) Install the pedals on the pedal cranks using an Open Wrench. The Matrix

logo on the pedal strap must point upward. NOTE: Be careful to align the

threads correctly to avoid damage. A little grease on the threads should

help the pedals to screw in easily and correctly. Turn the left pedal

spindle counter clockwise when threading into the crank arm, and turn

the right pedal spindle clockwise when threading into the crank arm.

Z04

Z05

STEP 1

1) Pull the heart rate wire through the hole in the bottom of the seat frame,

and make sure the wire get through the tunnel of the plate. Mount the

seat handlebars to the seat frame by using three socket-ﬂat-head screws

(Z05).

Z04

Z05

STEP 2

CHAPTER 4: B

ike parts and assembly Guides

R1x_U1x_rev1.1.indd 15 8/6/10 2:50 PM