User`s manual

• If x*y is off-limit, then the command is forbidden.

• d means the image data. 1 print, 0 not print

• use this command to define the downloaded bit-image, use

command GS/n to print the downloaded bit-image.

• In the following circumstances ， clear the definition of

downloaded bit-image.

1. run ESC @ command

2. printer is reset and the power is off.

4.4.3 GS / n

[Name]: Print downloaded bit-image

[Format]： ASCII GS / n

Hexadecimal 1D 2F n

Decimal 29 47 n

[Description]：Use n specified mode to print the down-loaded

bit-image which is defined by GS * command.

Select the following mode for n;

n Enlarging mode

0 normal

1 Double height

2 Double width

3 Double height & width

4.4.4 GS P n

[Name]: Print prestored bit-image

[Format]： ASCII GS P n