Specifications

52
8.10 TROUBLESHOOTING - DRIVE BELT NOISE
CHAPTER 8: TROUBLESHOOTING
PROBLEM:
Noise is coming from the drive belt area.
SOLUTION:
1) Check to see if the front roller is grooved (Figure A).
a. Replace the grooved front roller with a smooth front roller (Figure B).
2) If a smooth roller is already installed on the unit:
a. Check to make sure that the drive belt spring is attached to the frame (re-attach if needed).
b. Lubricate the drive belt with a teflon based lubricant.
c. If the noise is still present after lubrication, replace the drive belt.
FIGURE A FIGURE B