Specifications

55
8.12.2 ENTERTAINMENT TROUBLESHOOTING – PICTURE FUZZY OR UNCLEAR
1. Usingaveriedgoodpieceofcoaxcable(agoodcoaxcablewill
have a signal strength of 10hz or greater), remove the console
back cover (Figure A) and hook the coax directly to the TV jack.
This bypasses internal connections for your machine (Figure B).
2. Checkyourinternalcablesandttingsinsideyourmachineat
the console (Figure B) and below the motor cover (Figures C &
D). Make sure you have no damage (kinks, cuts etc) and no stray
wiresorpoorttingsontheendsofthecables.Fittingsshouldlook
likeFigureE,withacleanushconnectorandnostrayaluminum
strands touching the center conductor. Replace or repair any
suspect cables.
3. Ifnodamagecanbefoundoncables,ttings,orconnectorsbegin
replacing cables and connectors with known good parts until the
damaged part is found. It is also possible that the console tuner is
damaged, replace as needed.
FIGURE A
FIGURE B FIGURE C
FIGURE D
FIGURE E
CHAPTER 8: TROUBLESHOOTING