Specifications

Version 1.1 2010 SB and 2010 TLS Copyright by Indoorcycling Group GmbH | www.indoorcycling.com ENG 10
1
2
1
1
2
default setting
The channel transmitting the cadence signal
from the transmitter to the computer console is
pre set. A sticker on the housing indicates the
preset channel on computer & transmitter.
To avoid cross reading please assure a clea-
rance of 52`` (1,3m) between components set
on identical channels or simply swap to another
channel. See therefor picture 10.
To assure that the digital cadence signal is
synchronized, please assure that the channel
setting on the computer console corresponds
with the setting of the cadence transmitter on
the front fork. The channel can be changed
manually.
Please view picture no. 2 and 3.
The use of rechargable Batteries may leads to male function of the computer and transmit-
ter units due to a voltage lesser than 1,5V
CHANNEL SETTING & BATTERIE INSTALLATION
hand tight
2x 1x
1x
PZ 2
ENGDEU ESP