Specifications

1) Important Safety Information

1.2 ELECTRICAL REQUIREMENTS

For your safety and treadmill performance, Matrix Fitness Systems' treadmills require a dedicated

20 amp circuit. The ground on this circuit must be non-looped. Please refer to NEC article 210-21

and 210-23. Your Treadmill is provided with a power cord with a plug listed below and requires the

listed outlet. Any alterations of this power cord could void all warranties of this product.

1.3 GROUNDING INSTRUCTIONS

The Matrix T4 or T5 Treadmill must be grounded. If it should malfunction or breakdown,

grounding provides a path of least resistance for electric current to reduce the risk of electric

shock. The treadmill is equipped with a cord having an equipment-grounding conductor and a

grounding plug. The plug must be plugged into an appropriate outlet that is properly installed

and grounded in accordance with all local codes and ordinances. If the user do not follow these

ounding Instructions, the user could void the Matrix limited warranty.

DANGER Improper connection of the equipment-grounding conductor can result in a risk of

electric shock. Check with a qualified electrician or ser

viceman if the user ar

e in doubt as to

whether the product is properly grounded. Do not modify the plug provided with the product if

it will not fit the outlet; have a proper outlet installed by a qualified technician.

120V UNITS DESIGNATED FOR U.S. MARKETS

The Matrix T5 or T4 Treadmill is for use on a nominal 120-volt circuit and has a non looped

grounding plug. Make sure that the 110V treadmill is connected to an outlet, NEMA 5-20R,

having the same configuration as the plug. No adapter should be used with this product.

220V UNITS DESIGNATED FOR U.S. MARKETS

The T5 or T4 Treadmill is for use on a circuit having a nominal rating more than 220 volts and

is factory-equipped with a specific power supply cord to permit connection to a proper electric cir-

cuit. Make sure that the 220V T5 or T4 is connected to an outlet, NEMA 6-20R, having the same

configuration as the plug. No adapter should be used with this product.

120V 20amp Plug NEMA 5-20P

220V 20amp Plug NEMA 6-20P

120V 20A Outlet NEMA 5-20R 

220V 20A Outlet NEMA 6-20R