Specifications

3) Overlay Description and Custom Settings
Active variable displayed in the time seven segment display.
Numeric entry is active.
P4 DEFAULT WEIGHT (EDIT)
This variable sets the default weight used in the calorie calculations.
Active variable displayed in the time seven segment display.
Sets to default on unit change.
Displayed in native units (kilogram or pounds).
Numeric entry is active.
P5 ACCUMULATED DISTANCE
Active variable displayed in the time seven segment display.
Accumulated distance is not editable, for display only.
Displayed in native units (miles or kilometers).
Holding the start key resets the accumulated distance.
P6 ACCUMULATED TIME
Active variable displayed in the time seven segment display.
Accumulated distance is not editable, for display only.
Holding the start key resets the accumulated distance.
P7 SOFTWARE VERSION
Active variable displayed in the distance seven-segment display.
Software version is not editable, for display only.
P8 START SPEED (EDIT)
Controls the starting speed for all programs (minimum speed not affected).
Active variable displayed in the speed seven-segment display.
Displayed in native units (miles per hour or kilometers per hour).
Reverts to default value on unit change.
Numeric entry is active.
P9 MAXIMUM SPEED (EDIT)
Controls the maximum speed for all programs.
Active variable displayed in the speed seven-segment display.
Displayed in native units (miles per hour or kilometers per hour).
Rever
ts to default value on unit change.
Numeric entry is active.
P10 DEFAULT CHANNEL (EDIT)
Controls the default channel for entertainment CSAFE compatible devices.
This variable is editable.
Numeric entry is active.
P11 DEFAULT VOLUME (EDIT)
Controls the default volume for entertainment CSAFE compatible devices.
This variable is editable.
Numeric entry is active.
P13 SPEED MODE (EDIT)
Changes from Standard (Miles) to Metric (Kilometers).
Unit change will force unit dependent variables to revert to their default values.
3.5) SETTING UP ENTERTAINMENT AND CSAFE DEVICES
On the back of the console there are three RJ45 connectors on the T5 and two on the T4, for
the users convenience. They ar
e labeled for Enter
tainment and
CSAFE The T5 allows the user
to use Entertainment audio and visual products in combination with CSAFE products like
FITLINXX.
Locate the three jacks. Use the CSAFE IN to plug in any CSAFE device using the RJ45 connector.
5
MINIMUM
VARIABLE DEFAULT FACTORY MAXIMUM STEP SIZE UNITS
Maximum Time 5 20 95 5 minutes
Default Time 5 20 NV max time 5 minutes
Default Level 1 1 20 1
Default Weight 80 150 400 5 pounds
Default Age 15 30 100 1 years
Start Speed 0.5 1 2 0.1 mph
Maximum Speed 2 12 12 0.1 mph
Machine Type T4 T4 T5 1 Unit
IR On/Off OFF ON ON 1 Unit
Default Channel 1 1 30 1
Default Volume 1 16 30 1