User guide

15
Before you install your Matrox Axio card set
Set the power selection switch on your
X.effects card
Your X.effects card requires additional power, either from your computer’s
internal supply, or from an external power supply. The power selection switch
must be properly set for your card to receive power from your selected power
source. The power selection switch is located at the front of your X.effects card,
near the card bracket.
°To set your X.effects card to receive power from the internal power supply:
Push the power selection switch
towards the back of your X.effects
card as indicated in the following
illustration.
Power selection
switch set for
use with
internal power
supply
X.effects
card
Axio Installation and User Guide.book Page 15 Monday, July 14, 2008 8:00 AM