User guide

23
Prepare for mounting
Using the desktop foot
You can use the desktop foot to lay your X.link breakout box flush on your
desktop with its audio/video connections facing up. To use the desktop foot, pull
the foot out from the back of your breakout box and place the breakout box flush
on your desktop.
Attaching the desktop pedestal
1 Unpack the desktop pedestal.
2 Line up the pedestal guide tabs with the guide slots on the bottom of your
X.link breakout box.
3 Line up the thumb screw on the pedestal with the threaded hole on the X.link
breakout box, and carefully tighten the thumb screw until snug. Do not
overtighten!
¦NoteTo remove the desktop pedestal from the breakout box, unscrew the
thumb screw on the pedestal and lift up the breakout box.
Desktop foot
Desktop
pedestal
Axio Installation and User Guide.book Page 23 Monday, July 14, 2008 8:00 AM