User guide

43
Connect your X.linkLE audio/video and SDI cables to the Axio LE card
Connect your X.linkLE audio/video and SDI
cables to the Axio LE card
1 Connect the X.linkLE audio/video cable from the back of the X.linkLE
breakout box to the X.linkLE audio/video cable connector (labeled B) on
your installed Axio LE card. Tighten the thumb screws until snug to ensure a
stable connection.
2 Connect the X.linkLE SDI cable from the back of the X.linkLE breakout box
to the respective SDI connectors (labeled OUT A, OUT B, and IN) on your
installed Axio LE card.
²Caution Use extra care when attaching the cables to their respective
connectors (bent pins can cause your Matrox Axio LE system to not perform
properly). Also, do not bend the attached cables too sharply. Excessive
bending or flexing can damage internal, shielded wires.
OUT B
OUT A
IN
B
SDI OUT A
SDI OUT B
SDI IN
X.linkLE audio/video cable
Axio LE audio/video
cable connector (B)
X.linkLE SDI cable
Axio LE card bracket
Back of X.linkLE breakout box (partial view)
Axio LE
SDI
connectors
Axio Installation and User Guide.book Page 43 Monday, July 14, 2008 8:00 AM