User guide

82
Chapter 8, Defining Your Adobe Premiere Pro Settings
Specifying your video output settings (X.linkSD)
You can specify various settings to configure your video output signals from the
X.linkSD breakout box, such as to adjust the gain of your analog video, and
adjust the horizontal delay of your SDI video.
°To specify your video output settings:
1 Choose Project > Project Settings > General and click the Playback
Settings
button.
2 Click the Video Output tab.
3 Under Component Gain, use the sliders to increase or decrease the Y
(luminance),
Cb (blue minus luminance), and Cr (red minus luminance) gain
of the component video output.
4 Under S-Video Gain, use the sliders to increase or decrease the Y
(luminance) and
C (chrominance) gain of the S-Video output.
5 Under Composite Gain, use the slider to increase or decrease the gain of
the composite video output.
6 Under Master Output Format, select the video format you want for all
video outputs from the X.linkSD breakout box. Depending on your project’s
video format, you may not be able to change the master output format.
¦NoteIf you’re working with an HD project, the master output format will
automatically be set to NTSC or PAL depending on your project’s video
format, and the video output will be downconverted (this includes appropriate
color space conversion from HD to SD).
Axio Installation and User Guide.book Page 82 Monday, July 14, 2008 8:00 AM